Motorola MC5590 Quick Start Manual

MC5590
Note: Remove protective shipping film that covers the touch screen, scan window and camera window
before using.
Quick Start Guide
1
2
3
4 (Note 1)
1 Scan/Action Button
2 Volume Up/Down Button
3 Microphone
4 Power Button
Note 1: To reset the MC55, press and hold the Power button for five (5) seconds.
12
13
9
10 14
11
15
16
8
7
6 17
18
12 Handstrap
13 Battery 18 Tether
14 Battery Latch 19 Scan/Action Button
15 Camera Flash 20 Action Button
5
16 Camera 21 Stylus
17 Scan Window 22 Speaker
(see Data Capture Options)
Notifications
5 I/O Connector 9 Scan/Decode LED
6 Keypad 10 Charging/Battery Scan/Decode LED:
7 Scan/Action Button Status LED
Red: Scanning active
8 Touch Screen 11 Not Used
Green: Good Decode
(with screen protector) 1
2
Charging/Battery Status LED:
Slow blinking amber: Battery charging
Solid amber: Fully charged
1 Scan/Decode
Fast blinking amber: Charging error 2 Charging/Battery Status
3
3
Insert the Battery
2
2
4
5
1. Insert the battery, bottom first, into the battery compartment.
1
2. Press down on the battery until
8 6
the battery latch snaps into
ok
10 place.
1 2 DEF 3 9
F1 ABC
F2 F3
TAB BKSP
GHI 4 5 MNO 6
7 F4 JKL F6 1 Talk
F5
SHIFT 9
PQRS 7 TUV 8 WXYZ 2 Navigation
F7 F8 F9 ENT
0 SPACE # 3 Soft Key
F10 ESC
4 Scan/Action Button
5 End
Numeric Keypad
22 6 Orange Key
Blue Key 7 Backlight
8 Blue Key
Use this key to access function keys shown on the keypad in blue.
21
> Press the Blue key once to activate this state, followed by 9 OK
another key. 10 Start Menu
Remove the Battery
Orange Key
Use this key to access the secondary layer of characters.
20 >
Press the Orange key once to lock the keypad into Alpha state.
>
Press the Orange key a second time to return to the normal state.
19
3 3
3
2
4 3 3 2 4 3
9
1 5 1
5
4
ok
2
10 ok
9
10
2
1. Slide battery latch to the right.
2 2
8 6
The battery ejects slightly.
7
2. Grasp the battery and lift
Alpha-Numeric Keypad PIM Keypad
from the MC55.
Blue Key
Use this key to access function keys shown on the keypad in blue.
> Press the Blue key once to activate this state temporarily,
followed by another key.
> Press the Blue key twice to lock this state.
> Press the Blue key a third time to unlock.
Orange Key
Use this key to access the secondary layer of characters and actions.
> Press the Orange key once to activate this state temporarily,
followed by another key.
> Press the Orange key twice to lock this state.
> Press the Orange key a third time to unlock.
Charge the MC55
Use the Single-slot USB cradle
or a Four-slot cradles to charge
the battery in the MC55.
You can also charge a spare battery
using the Single-slot cradle.
2
1
Charging/Battery Status LED
Slow Blinking Amber = Charging
Solid Amber = Fully charged
Fast Blinking Amber = Charging error
1
Charge the Battery
Use the Four-slot Battery Charger
to charge batteries separately.
2
Note: The 2200 mAh battery charges in less than four hours and the 3600 mAh battery charges in less
than six hours.
Install Microsoft ® ActiveSync ®
Install ActiveSync to communicate with a host computer.
Download ActiveSync ® 4.5 or higher from http://www.microsoft.com
and follow the instructions to install ActiveSync onto the host computer.
Connect to Host Computer
Create a Partnership
Follow the on-screen ActiveSync instructions to establish
a connection between the MC55 and the host computer.