Setting A Static Ip Address; Managing Static Ip Addresses - Motorola MK1250-0N0DAKBNTWR - Symbol Micro Kiosk MK 1250 Product Reference Manual

4 - 20 MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide

Setting a Static IP Address

To set a static IP address for a wired device:
In the
1. MK1200 Configuration Utility
Ethernet.
Setting a Static IP Address
Figure 4-13
In the text box, enter the IP address.
2.
Also select and define the adapter's
3.
Optionally, select and define the
4.
Ensure that
5. Enable DHCP
Save the changes.
6.

Managing Static IP Addresses

Specify the static IP address of an MK1200, which is on a different subnet than the Symbol Remote Device
Manager PC, to establish a connection and still be managed by the RDM. This causes the RDM to list the devices
and their IP addresses, without performing discovery, in the
For this to occur, the MK1200 that is on a different subnet than the RDM must have a static (unchanging) IP
address during the remote management session.
This is useful when MK1200s are on more than one subnet, when bandwidth is a consideration, or when MK1200s
are connected over a WAN. For example, if the MK1200 RF and wired Ethernet devices are on different subnets,
the Remote Device Manager can still manage all devices.
window, select
IP Address
Default Gateway
and
DNS Server(s) DNS Domain
is disabled (de-select its check box).
under the appropriate adapter: Onboard Wired
and .
Subnet Mask
.
main screen.
RDM