Surge Suppression - Nortel 2330 Solution Manual

70 Appendix

Surge Suppression

When installing the antenna in an outdoor configuration, the surge suppressor, DR4000085E5, is required to
be inserted into the connection at or near the demarkation point from the building. Please refer to the following
illustration for proper connection to the cables and proper grounding of the surge suppressor component.
Figure 22. Cable connection and grounding
Warning!
cable/antenna combination exiting the building. The required components must
be rated and approved for use in the intended application.
NN47250-503 (323847-C Version 02.01)
A properly rated surge suppressor is required for any