Nortel 2330 Solution Manual page 44

44 WLAN 2300 Series Outdoor Solution with Indoor Mounted AP
Contact information and access permissions
Make sure the following general requirements are met before beginning the installation:
• Confirm customer-provided information, such as site contact names and telephone numbers.
• Examine the building (tenant) lease to verify or establish building roof or tower rights. If available, use
layout drawings to evaluate the feasibility of modifications or special permits that might be necessary.
• For a tower-mounted installation, find out if the owner, operator, or landlord requires a professional or
certified tower climber to do the work.
Physical site
Make sure the following physical site requirements are met before beginning the installation:
• Identify the roof area, wall, or tower for mounting the antenna. You must choose a site with a clear
line-of-sight from the transmitting antenna.
• Determine the access area, such as a stairway or a ladder.
• Identify existing equipment installations and assess the condition of proposed towers or mounting structures.
• Assess environmental conditions, such as temperature, ventilation, and humidity.
Warning!
cm (7.9 inches) separation distance between the radiating element(s) and all
persons. This safety warning conforms with FCC radio frequency exposure limits.
Warning!
2330A/2330B are not intended to be operated with any antenna(s) other than
those furnished by Nortel. An intentional radiator may only be operated with the
antenna(s) with which it is authorized. For a complete listing of the authorized
antennas for use with this product, visit http://www.nortel.com/support.
Caution!
suppressor/Access Point during a storm.
NN47250-503 (323847-C Version 02.01)
Install this device in such a manner as to maintain a minimum of 20
Intentional radiators, such as the Nortel WLAN Access Points
Do not install the outdoor antenna or connect it to the surge