Removing the front bezel and top cover
To install option cards or DIMMs, you must remove the front bezel and the top
cover from the gateway.
To remove the front bezel:
1
2
Figure 20 Removing the front bezel
Shut down the VPN Router 1750 using the Web GUI or the CLI, and then
unplug it as described in
hardware" on page
52.
Warning: Risk of electric shock
Make sure to turn off the VPN Router 1750 and unplug it before you
attempt to install an option card or DIMM.
Use a Phillips screwdriver to turn each of the two screws on the front bezel a
quarter turn counterclockwise
Chapter 3 Installing option cards and DIMMs 53
"Shutting down the system to add or replace
(Figure
20).
Nortel VPN Router Installation — VPN Router 1750
CS260015E