Figure 16 Attaching The Cage Nuts To The Rack; Figure 17 Installing The Shelf In The Equipment Rack - Nortel 1750 Install Manual

Figure 16 Attaching the cage nuts to the rack

2
3

Figure 17 Installing the shelf in the equipment rack

4
5
Chapter 2 Installing the Nortel VPN Router 1750 chassis 47
Rail
without
threaded
holes
Cage nut
CS260003A
Position the rack-mount shelf inside the rack as shown in
Align the holes in the shelf with holes in the front of the rack.
Rack edge
Flange
Snap the support flange into place
above the flange fits into the appropriate hole.
Insert one of the supplied panhead screws through the top hole on each side of
the shelf into the hole in the rack, and tighten the screws
(Figure 17). Ensure that the alignment pin
Nortel VPN Router Installation — VPN Router 1750
Figure 17.
CS260003A
(Figure 17).