3
4
Figure 19 Replacing the front bezel
Chapter 2 Installing the Nortel VPN Router 1750 chassis 49
Insert one of the supplied panhead screws through the bottom hole on each
side of the shelf into the hole in the rack, and tighten the screws
page
47).
Replace the front bezel
a
Hold the two handles on the bezel, and push it onto the chassis.
b Use the Phillips screwdriver to tighten the two screws that secure the
bezel to the chassis.
Press here
(Figure
19).
Nortel VPN Router Installation — VPN Router 1750
(Figure 17 on
CS260005E