Figure 33 1000Base-T (1000 Gt) Ethernet Interface Card; Table 21 1000Base-T (1000 Gt) Ethernet Pinouts - Nortel 1750 Install Manual

84 Appendix A Technical specifications
The following figure shows the 1000BASE-T (1000 GT) Ethernet interface
full-height card for VPN Router.

Figure 33 1000BASE-T (1000 GT) Ethernet interface card

Select cables for the card as follows. Keep in mind that this card is
auto-negotiating and uses the highest possible data rate:
•
•
•
The following table provides the pinouts for the 1000BASE-T (1000 GT) Ethernet
interface card..

Table 21 1000BASE-T (1000 GT) Ethernet pinouts

12345678
NN46110-316 02.01
For 1000BASE-T operation, use Category 5 four-pair Ethernet wiring. The
cable must comply with the TIA 568 wiring specification. Nortel recommends
a maximum length of 100 meters for the cable segment.
For 100BASE-TX operation, use Category 5 twisted-pair wiring: one pair
each for transmit and receive operations. The cable must comply with the
EIA 568 wiring specification. Nortel recommends a maximum length of 100
meters for the cable segment.
For 10BASE-T operation, use Category 3, 4, or 5 twisted-pair wiring.
Pin
1
2
3
4
5
6
CS260010A
7
8
Description
TP0+
TP0-
TP1+
TP2+
TP2-
TP1-
TP3+
TP3-