Ending Administration Programming; Confirming That The C3050 Is Registered - Nortel Meridian Companionж Supplementary Manual

C3050 registration instructions using the Administration Terminal Page 5 of 10
7.

Ending Administration programming

After registering all the portables, turn off Administration programming on the
Administration Terminal.
1.
2.
Note: Administration programming turns off 30 minutes after the last

Confirming that the C3050 is registered

1.
2.
3.
4.
5.
6.
• Press SPACE to add a blank space to the name.
• Press BKSP to delete the previous character.
• Press ¯ or ˘ if the next letter is on the same button.
Press SAVE . The display shows the registered name, for example
NORTEL 1 registered .
Press CHANGE until the terminal display shows Mstr Reg Enbl: N .
Press ® . The terminal display shows End of session .
successful registration unless you lock it on.
Close, then open the portable's flap.
If the display shows the system name that you just registered, proceed to
step 5.
If the display shows a different system name or No system selected ,
proceed to step 2.
Press Í . The display shows WIRELESS SYSTEMS .
Press " or ' until the display shows the system name you
registered.
Press SELCT .
Press Ò . You hear dial tone, and the display shows [ .
If you do not hear dial tone, check that you have selected the correct
system and try to register the portable again.
Close the portable's flap, and set the ringer control switch to g .
Meridian Companion Portable Telephone Registration Instructions