Configuring Tunnels - Nortel BCM200 Overview

50 WAN interconnected LAN reference topologies
Configuring tunnels
After the sites are configured, configure the branch and client tunnels as
required by the site. See the figures
(page 50)
Branch tunnel configuration diagram
Configuring a branch tunnel
Step
1
2
3
4
5
6
Small and Medium Business Solutions Overview and Configuration Guide
Copyright © 2006, Nortel Networks
.
and "Client tunnel configuration diagram" (page
Action
Start the Element Manager, and access the BSR222 Web page.
In the Element Manager, Element Navigation Panel, click VPN to
access the VPN page and click the Summary tab.
From the Contivity VPN Client list, select an open item.
Click Edit to access the VPN—Branch Office page.
On the VPN—Branch Office page
a. Select Branch Office as the connection type.
b. Select the Active check box and the Nailed Up check box.
c. Type a name for the tunnel.
d. Type the key that was previously shared and retype to confirm.
This key must be identical at both ends of the tunnel.
e. Type the secure gateway address for the far end of the tunnel.
Click Add to save the settings and access the VPN—Branch
Office—IP Policy page.
SMB
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
"Branch tunnel configuration diagram"
ATTENTION
Nortel Networks Confidential
51).