Position The Access Point Before Installation - Extreme Networks ExtremeWireless AP5010 Installation Manual

Position the Access Point before Installation

All optional brackets and accessories are sold separately. For detailed installation instructions about all
mounting procedures, refer to the
Networks Documentation Support site.
Position the Access Point before Installation
About This Task
There is a red dot on the back of the access point and the bracket to help you position the access point
for installation.
Procedure
Line up the red dot on the access point and the bracket for ease of installation.
Figure 2: AH-ACC-BKT-AX-TB bracket red dot
What to Do Next
Install the Access Point on a Nonstandard Ceiling Grid or a Wall
14 ExtremeWireless™ AP5010 Access Point
802.11ax and Cloud Access Points Accessories Guide
Install the Access Point
in the Extreme
on page 15