AP5010 Overview
Maximum Antenna Gain Information
Software mode
Mode 1
Mode 2
Micro USB Console Port
Through the console port, you can make a serial connection between your management system and the
access point.
Note
The best practice is to use the Extreme Networks micro USB cable (part number ACC-WIFI-
MICRO-USB). When you connect to the device using the micro USB Console port, the
management station from which you connect to the device must have a VT100 emulation
program, such as TeraTerm Pro (a free terminal emulator) or Hilgraeve HyperTerminal. Set
your baud rate to 115200.
Power Profile
Learn about AP5010 access point power profile.
Power Specifications
•
IEEE 802.3bt PoE Power
Power Profile
2.4G RF
5G RF
6G RF
BLE
2nd Ethernet port
USB (2.5W)
PSE (15.4W)
Power Options
•
Power Draw: Typical: 21.0 W; Max: 25.5 W
•
802.3bt PoE capable
•
Gigabit Ethernet port
Radio 1
Radio 2
2G, 4.2dBi
5G, 6dBi
2G, 4.2dBi
5G, 6dBi
5G, 6dBi
6G, 6dBi
BT profile
AT profile
18dBm, 4x4
18dBm, 4x4
18dBm, 4x4
18dBm, 4x4
18dBm, 4x4
18dBm, 4x4
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Maximum Antenna Gain Information
Radio 3
6G, 5.2dBi
6G, 5.2dBi
AT with USB
18dBm, 3x3
18dBm, 3x3
18dBm, 3x3
Yes
Yes
Yes
No
ExtremeWireless™ AP5010 Access Point
IoT radio
4.2dBi
4.2dBi
Power Supply
18dBm, 4x4
18dBm, 4x4
18dBm, 4x4
Yes
Yes
Yes
No
11