Displaying An Interface Id; Nortel Ethernet Routing Switch 4500 Series - Nortel 4524GT Configuration

140 Chapter 4 Configuring Quality of Service (QoS) with the Java Device Manager (JDM)
The association between interfaces, role combinations, and queue sets can
be displayed. A role combination is a unique label that identifies a group
of interfaces.

Displaying an interface ID

To display the interface ID:
Step
1
QOSDevice, Interface ID Assignments tab
Copyright © 2007, Nortel Networks
.
An interface group that is referenced by a policy cannot be deleted. The
policy must first be deleted. Also, an interface group that has ports
assigned to it cannot be deleted.
Action
Open the QosDevice screen by selecting QoS > QoS Devices from
the menu. This screen is illustrated in QOSDevice, Interface Queue
tab. Select the Interface ID Assignments tab. This tab is illustrated
in QOSDevice, Interface ID Assignments tab.
Interface ID Assignments tab fields
The following table Interface ID Assignments tab fields
Interface ID Assignments tab fields.

Nortel Ethernet Routing Switch 4500 Series

Configuration — Quality of Service
NN47205-504 (322816-B)
5.1 23 November 2007
ATTENTION
—End—
03.01 Standard
describes the