Advertisement
Reset of this board and evaluation MCU
POWER LED (LED17)
Series regulator 5V -> 3.3V (U7)
Downloaded from
Elcodis.com
electronic components distributor
By pushing a reset switch (SW1), a RSTX signal (L) is outputted and this board and Evaluation
MCU are reset.
It is not concerned with AC adapter power supply supply and the terminal for an external power sup-
ply input, but the light is switched on when a VCC power supply is supplied..
+3.3 V power supply is generated from +5 V power supply supplied from AC adapter.
• Rating current : 3A (max.)
7
Advertisement
