Mercedes-Benz EQE Operator's Manual page 92

Opening and closing
90
Press closing button 1 on the trunk lid.
#
Vehicles with KEYLESS-GO
Press locking button 2 on the trunk lid.
#
If a SmartKey is detected outside the vehicle,
the trunk lid will close and the vehicle will be
locked.
With the trunk lid completely open, press and
#
hold the H button on the SmartKey. The
SmartKey must be in the vicinity of the vehi-
cle.
Vehicles with HANDS-FREE ACCESS
With the trunk lid completely open, make a
#
kicking movement with your foot below the
bumper ( page 91).
/
Trunk lid automatic reversing function
The trunk lid is equipped with automatic blockage
detection with a reversing function. If an obstacle
obstructs the trunk lid during the automatic clos-
ing process, it will automatically open again. The
automatic reversing function is only an aid and is
not a substitute for your attentiveness.
During the closing process, make sure that no
#
body parts are in the closing area.
& WARNING Risk of becoming trapped
despite reversing function
The reversing function will not react:
to soft, light and thin objects, e.g. fingers
R
towards the end of the closing procedure
R
In these situations in particular, the reversing
function cannot prevent someone being trap-
ped.
Ensure that no body parts are in the
#
closing area.
If someone is trapped, use one of the fol-
#
lowing options:
Press the H button on the Smart-
R
Key.
Press the remote operating switch on
R
the driver's door.
Press the closing or locking button
R
on the trunk lid.
Pull the trunk lid handle.
R