Mercedes-Benz EQE Operator's Manual page 261

% Do not use the 360° Camera under such cir-
cumstances. You could otherwise injure oth-
ers or collide with objects when parking the
vehicle.
For technical reasons, the standard height of the
vehicle may be altered if the vehicle is carrying a
heavy load and can result in inaccuracies in the
guide lines and in the display of the generated
images.
The field of vision and other functions of the cam-
era system may be restricted due to additional
attachments on the vehicle (e.g. license plate
bracket, bicycle rack).
%
The contrast of the display may be impaired
by abrupt, direct sunlight or by other light
sources, e.g. when driving out of a garage. In
this case, pay particular attention.
%
Have the display repaired or replaced if,
forexample, pixel errors considerably restrict
its use.
See the notes on cleaning the 360° Camera
( page 348).
/
▌Calling up the 360° camera views using the
button
%
Depending on the vehicle's equipment, button
1 may also be located in a different position
in the center console.
Press button 1.
#
Select the Camera Views menu.
#
Driving and parking 259
In the multimedia system, select the desired
#
view ( page 255).
/
▌Selecting a view for the 360° camera (reverse
gear)
Engage reverse gear.
#
Select the desired view in the multimedia sys-
#
tem ( page 255).
/
▌360° camera with GPS – managing activation
positions
Multimedia system:
© Settings Assistance
4 5 5
Camera
5
Renaming an activation position
% You can determine activation positions on the
Camera Views menu. ( page 255)
/
Select u for the desired activation posi-
#
tion.
Select Edit.
#
Enter a name and confirm.
#
The activation position will be saved under the
new name.