Mercedes-Benz EQE Operator's Manual page 49

Always ensure that an unused seat belt
#
is fully retracted.
Fastening and adjusting seat belts
If the seat belt is pulled quickly or sharply, the
seat belt retractor locks. The seat belt strap can-
not be pulled out any further.
Always engage seat belt tongue 1
#
2
belt into seat belt buckle of the corre-
sponding seat.
To adjust the seat belt height: press button
#
on the seat belt outlet and slide the seat belt
outlet to the desired position.
To engage the seat belt outlet: release button
#
3 and ensure that the seat belt outlet
engages.
%
A seat belt can only provide the best level of
protection if it is worn correctly. Observe the
notes on fastening the seat belt (
* NOTE Deployment of components of the
restraint system when the front passenger
seat is unoccupied and a seat belt is
buckled
When the front passenger seat is unoccupied
and the seat belt tongue of the seat belt is
engaged in the seat belt buckle, components
of the restraint system may deploy unnecessa-
rily on the front passenger side, e.g. the Emer-
gency Tensioning Device.
of the seat
Only buckle the seat belts as intended.
#
%
Observe the notes on stowage areas
( page 119).
3 /
Information on installing a child restraint sys-
tem and on children traveling in the vehicle
can be found in the "Children in the vehicle"
section ( page 61).
/
Seat belt adjustment function
Vehicles with PRE-SAFE
page 44).
/
has been fastened, the automatic seat belt adjust-
ment may apply a certain amount of tightening
force. Do not hold the seat belt tightly while it is
adjusting.
You can activate and deactivate the seat belt
adjustment function using the multimedia system
( page 48).
/
Occupant safety
47
®
: after a front seat belt