Mercedes-Benz EQE Operator's Manual page 313

Measurement can be stopped early by interrupt-
ing the acceleration procedure.
Quarter mile race
Select Z Drag race options.
#
Select Quarter Mile.
#
Set a target distance.
#
Measurement stops as soon as the specified
target distance has been reached.
Start off and begin the measurement.
#
Measurement begins when the vehicle accel-
erates. Timing runs until the target distance or
a maximum of one mile has been traveled.
Measurement can be stopped early by interrupt-
ing the acceleration procedure.
Measuring braking
Z Drag Race options
#
Select Braking.
#
Set a starting speed or select Automatic.
#
Start off and begin the measurement.
#
Brake to a stop.
#
Measurement is incremental, in steps of
6 mph (10 km/h) to a stop. If the braking pro-
cedure is started e.g. at a speed of 98 mph
(157 km/h), measurement starts as soon as
93 mph (150 km/h ) has been reached
Storing and calling up measured values
If measurement is completed or canceled, a
prompt appears asking whether the measurement
should be saved.
Confirm the prompt with OK to save.
#
Calling up saved measurements
± Select History.
#
Select Acceleration, Quarter Mile
#
Select a measurement.
#
The desired measurement is displayed in
detail.
or
Delete a measurement.
#
MBUX multimedia system 311
Calling up the telemetry display
Multimedia system:
TRACK PACE
4
The telemetry display shows current vehicle data
as a digital value and as a diagram. Up to four
parameters can be selected to be shown on the
display.
For example:
Engine speed
R
Wheel angle
R
Speed
R
Steering angle
R
or Braking. Set the desired parameters.
#
Set the time period.
#
The set parameters will be evaluated in the
diagram for the selected time period.
Configuring AMG TRACK PACE
Requirements:
To connect a mobile device to the TRACK PACE
app:
Telemetry
5