Table of Contents
Advertisement
Add/ Configure
DVR
Display Area
Client window. Note that the appearance of the window will differ
before connecting to your DVR.
2. Click DVR List. The DVR List window opens.
3. Configure the following:
• Name: Enter the name you would like to use for
your DVR.
• IP / DDNS: Enter the IP or DDNS address of your
DVR.
• Port: Enter the HTTP port number used by your
DVR (default: 80).
• ID: Enter the user ID for remote viewing
(default: 9).
• Password: Enter the password for remote
viewing (default: 3333).
4. Click Add. Then click Close.
5. Select your DVR from the drop-down menu at the
top of the screen and click
video from your cameras will appear when the
connection is successful.
NOTE: If it does not connect within 15 seconds, click
connection.
Copyright
2012 Lorex Technology Inc.
Select DVR
DVR List
to connect. Live
Remote Access and Software:
and click
again to refresh the
Open/refresh
connection
Close
connection
DVR control
panel
6
Advertisement
Table of Contents
