Lorex Edge LH300 Series Frequently Asked Questions Manual page 4

.
Add/ Configure
DVR
PTZ Settings
Full Screen View
Snapshot Capture
Event List
Display Area
Client window. Note that the appearance of the window will differ before connecting
to your DVR.
2. Click DVR List. The DVR list window opens.
3. Configure the following:
• Name: Enter the name you would like to use for your
system.
• IP / DDNS: Enter the IP or DDNS address of your DVR.
• Port: Enter the HTTP port number used by your DVR
(default: 80).
• ID: Enter the user ID for remote viewing (default: 9).
• Password: Enter the password for remote viewing
(default: 3333).
4. Click Add. Then click Close to return to the main client
window.
5. Select your DVR from the drop-down menu at the top of
the screen and click
your cameras will appear when the connection is successful.
NOTE: If it does not connect within 15 seconds, click
connection.

Copyright 2012 Lorex Technology Inc.
to connect. Live video from
Remote Access and Software:
Select DVR
DVR List
and click again to refresh the
Open/refresh
connection
Close
connection
DVR control
panel
4