Lorex Edge LH300 Series Frequently Asked Questions Manual page 22

Step 1 of 2: Connect the camera to the DVR:
1. Connect the BNC to RCA adapter to Channel 1. Connect the yellow RCA connector into the
BNC to RCA adapter.
NOTE: If you have a BNC camera, connect the BNC connector.
BNC to RCA adapter
2. Connect the white RCA cable from the camera into the Audio In port in port 1.
3. Repeat steps 1 - 3 for channel 2, and Audio In port 2.
Step 2 of 2: Enable Audio In the DVR
After you connect the audio-enabled cameras to your system, configure the audio settings in the
DVR to record live audio.

Copyright 2012 Lorex Technology Inc.
BNC to RCA adapter
RCA connector
Audio connector
DVR Menus and Settings:
22