Table of Contents
Advertisement
Figure 39. Installing the 40 mm fan cage
Next steps
1.
Install the system
cover.
2. Follow the procedure listed in
3. Check the management software to see if all the fans are rotating at the optimal speed.
Removing the 40 mm fan cage holder
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the 40 mm fan
Steps
1. Using the Phillips 1 screwdriver, remove the screw that secures the cage holder.
2. Lift up the cage holder to remove it from the chassis.
After working inside your
Safety
instructions.
Before working inside your
cage.
system.
system.
Installing and removing system components
43
Advertisement
Table of Contents
