Service And Maintenance; Operation, Installation, And Repair; General Safety And Regulatory Information - Konica Minolta KDR AU DDR Operator's Manual

II. SAFETY

8.0 SERVICE AND MAINTENANCE

NOTE: When service or maintenance will be performed the technician must lock the equipment from all energy
sources.
The equipment must be checked according to the "Function and Safety Checks" in this manual to maintain reliability and
serviceability, and to ensure the safety of the patients, the operator, and third parties. If national rules or regulations speci-
fy more frequent checks and/or maintenance, such regulations must be observed.

8.1 Operation, Installation, and Repair

Modifications of or additions to the device must be made in accordance with legal regulations and generally accepted
engineering standards.
Konica Minolta cannot assume responsibility for the safety features and for the reliability and performance of the equip-
ment, if:
• Installation of equipment expansions or modifications are not approved by the manufacturer
• Installation of equipment expansions or modifications are not carried out by persons authorized by the manu-
facturer
• Components are not replaced by original parts in case of a malfunction
• The electrical installation of the room does not meet the requirements or the corresponding national regula-
tions
• The product is not used in accordance with the operating instructions
CAUTION: Do not remove, disassemble, change, modify, repair, or add any part. Only service engineers should
open the covers on the system.
CAUTION: When installing this machine in a different location, contact Konica Minolta or our designated dealer.
CAUTION: Do not modify this device.

8.2 General Safety and Regulatory Information

WARNING! For continued safe use of this equipment, follow the instructions in this manual. Both operator and
service personnel must study this manual carefully. Instructions herein should be thoroughly read and under-
stood before attempting to place the equipment in operation, especially the instructions concerning safety,
regulations, dosage, and radiation protection.
WARNING! Please study this manual and its referenced manuals for each system component to be fully aware
of all safety, installation, calibration, and operational requirements.
WARNING! Take adequate steps to ensure protection from exposure to radiation. It is vitally important that
everyone working with X-ray radiation is properly informed and trained on its hazards.
KDR TM AU-DDR Advanced U-Arm System with
Dynamic Digital Radiography (KDR AU DDR)
21
KMHA 500-000099
Revision D