Emergency Stop; Radiation And X-Ray Tube - Konica Minolta KDR AU DDR Operator's Manual

Advanced u-arm system with dynamic digital radiography

Table of Contents

II. SAFETY

6.3 Emergency Stop

The emergency stop is located on the outer right corner of the bucky assembly. If the stand is not working properly or

making unintended movements, the emergency stop switch can be pressed to immediately stop the stand from moving.

The emergency stop only disables motorized mechanical movements of the stand and does not affect the generator and

other components of the system. To recover movement capability, make sure the area around the stand is clear and free of

obstructions, then pull the switch directly out and rotate it clockwise. Contact your service engineer if there are persistent

erratic movements in the stand.

WARNING!

Make sure that patients, operators, and third parties are protected against unnecessary X-ray radi-

ation according to local regulations.

WARNING!

The collimator filter must be verified so that the correct filter is used during exposure.

NOTE: Verbal and visual communication must be possible between the operator and the patient when expo-

sures are performed.

NOTE: The X-ray beam must never be outside the boundaries of the image receptor holder.

KDR

AU-DDR Advanced U-Arm System with

Dynamic Digital Radiography (KDR AU DDR)

Figure 6.3.1

Emergency Stop

KMHA 500-000099

Revision D

Table of Contents