SonicWALL TELE3 TZ Getting Started Manual page 15

Configure TCP/IP Settings on Your WorkPort Computer
6
Configure your WorkPort computer IP address, subnet mask, and gateway IP address. If
the Management station is running Windows 2000, do the following:
Note: Consult your operating system manuals for specific instructions on configuring
network settings.
A TCP/IP Properties window appears.
Restart your computer if you are running Windows 95, 98, or NT. Windows 2000 does
7
not require restarting the computer for network settings to take effect.
Page 14
1. From the Start menu, select Settings,
and then Network and Dial up
Connections.
2. Right click on the Local Area
Connection icon, and select
Properties.
3. Select Internet Protocol (TCP/IP).
4. Click Properties.
5. Select Specify an IP address.
6. Enter 192.168.168.200 in the IP
address field.
7. Enter 255.255.255.0 in the Subnet
mask field.
8. Enter 192.168.168.1 in the Gateway
field.
9. If there are no server IP addresses listed
in the DNS settings, use the DNS IP
addresses from your ISP.
10. Click OK, then OK again to close the
Local Area Connection Properties
window.
→
Set Up Continues