Table of Contents
Advertisement
Section 3
Installation
3.1
Installation of the components
Unpack all supplied parts carefully, as they are highly sensitive in part to shock and
impact. Read the user manual prior to installation and proceed exactly as described.
3.1.1
Operating environment
Observe the following points to allow the instrument to function normally and give a long
operating life.
•
•
•
•
•
•
•
•
•
3.1.2
Installation of the devices
The carrying strap provided must be used to be able to carry the analysis unit safely over
short distances.
The instrument may not be used in dangerous environments.
The manufacturer and its suppliers reject any express or indirect guarantee for use with high-risk
activities.
Any use other than use in accordance with requirements defined in the user manual leads to the
loss of the warranty claims and can lead to personal injury and property damage, for which the
manufacturer assumes no liability.
Position the instrument securely on a flat surface taking care to remove any objects
from under the device.
The ambient temperature must be 15 °C to 35 °C (60 °F to 95 °F).
The relative humidity must be lower than 75% (no condensate formation).
A minimum clearance of 15 cm (5.9inches) must be ensured above and on all sides of
the device; this allows the air to circulate and prevents overheating of the electric
components. The dosage arm of the sample changer must be able to move freely.
Do not operate or store the instrument in extremely dusty, humid or wet locations.
Make sure that no liquids enter the instrument and immediately wipe away any liquids
that contact the instrument.
Protect the instrument against vibrations, direct sunlight, corrosive gases as well as
strong magnetic and/or electric fields.
Only use genuine replacement parts and accessories.
The instrument must be serviced by the manufacturer's service department at the
prescribed intervals.
When carrying or transporting the instrument components or instrument and if the total weight is
more than 18 kg, make sure that suitable lifting equipment is used and/or that the instrument
components or instrument are/is carried by two people.
WA R N I N G
N O T I C E
WA R N I N G
19
Advertisement
Table of Contents
