Connecting The Ac Power Cord For The Fixed Ac Power Supply (Method 2) - H3C S5130S-10P-EI Manual

Figure2-21 Connecting the AC power cord for the fixed AC power supply
Figure2-22 Securing the AC power cord for the fixed AC power supply through a cable tie
Connecting the AC power cord for the fixed AC power supply
(method 2)
1. Insert the two ends of the bail latch through the two holes at both sides of the AC-input power
receptacle.
2. Pivot up the bail latch, as shown in Figure2-23.
3. Connect the plug of the AC power cord to the AC-input power receptacle on the switch, as
shown by callout 1 in Figure2-24.
4. Pivot down the bail latch to secure the plug to the power receptacle, as shown by callout 2 in
Figure2-24.
5. Connect the other end of the power cord to the power source.
2-23