Table of Contents
Advertisement
The S5130S-28F-EI, S5130S-52F-EI, S5130S-28PS-EI, S5130S-28ST-PWR-EI, and
S5130S-52ST-PWR-EI switches provide two installation positions for the mounting brackets:
port side mounting position and power supply side mounting position.
The other S5130S-EI switches provide only the port side mounting position for the mounting
brackets.
2.
Align one mounting bracket with the screw holes at the mounting position. Use M4 screws to
attach the mounting bracket to the chassis. See
Figure2-4
and
Figure2-5
bracket C, D, and E (C as an example).
3.
Repeat step
2
to attach the other mounting bracket to the chassis.
Figure2-3 Attaching mounting bracket A (S5130S-28P-HPWR-EI switch)
Figure2-4 Attaching mounting bracket B to the port side mounting position (S5130S-52F-EI
switch)
Figure2-5 Attaching mounting bracket B to the power supply side mounting position
(S5130S-52F-EI switch)
for installing mounting bracket B, and
2-12
Figure2-3
for installing mounting bracket A,
Figure2-6
for installing mounting
Advertisement
Table of Contents
