ABB i-bus KNX Product Manual page 245

ABB i-bus® KNX REMOVAL AND DISPOSAL
11 Removal and disposal
11.1 Removal
Fig. 54: Removal from the DIN rail
1. Press on the top of the device.
2. Release the bottom of the device from the DIN rail.
3. Lift the device up and off the DIN rail.
11.2 Environment
Consider environmental protection.
Electrical and electronic devices must not be disposed of as domestic waste.
The device contains valuable resources that can be recycled. Therefore, please take the device to a suitable recycling
center. All packaging materials and devices are provided with markings and test seals for proper disposal. Always dis-
pose of packaging material and electrical devices or their components at collection points or disposal companies au-
thorized for this purpose. The products comply with the statutory requirements, particularly the law on electrical and
electronic equipment and the REACH regulation. (EU directive 2012/19/EU WEEE and 2011/65/EU RoHS) (EU REACH
regulation and the law implementing the regulation (EC) no.1907/2006)
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 245