ABB i-bus KNX Product Manual page 202

ABB i-bus® KNX PARAMETERS
7.10.4.1 Parameter setting
This parameter can be used to define whether the settings for the parameter window are adopted from
the template or each parameter is set individually.
Options
Apply from template
Individual
—
7.10.4.1.1
DEPENDENT PARAMETER
Staircase lighting time
This parameter can be used to define how long the lighting remains switched on after an On telegram.
Options
00:00:00 ... 00:05:00 ... 18:12:15 hh:mm:ss
Condition for visibility:
Parameter window Staircase lighting \ Parameter Parameter setting \ Option Individual
—
7.10.4.1.2
DEPENDENT PARAMETER
Staircase lighting can be started again
This parameter can be used to define whether the staircase lighting time is extended by additional On
telegrams.
Options
No
Yes
Condition for visibility:
Parameter window Staircase lighting \ Parameter Parameter setting \ Option Individual
The parameterization is adopted from the template for each parameter.
Parameters can be set individually.
• Staircase lighting time
• Staircase lighting can be started again
• Staircase lighting switchable
• Warning before switching off the staircase lighting
• Disable staircase lighting via group object
• Change staircase lighting time via group object
• Restart staircase lighting after end of permanent ON
Additional On telegrams will be ignored. The staircase lighting time will not be extended.
The staircase lighting time will be extended by additional On telegrams. The number of extensions
can be set in the parameter Staircase lighting time extendable (pumping).
More information → Function Staircase lighting, Page 92.
• Staircase lighting time extendable (pumping)
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 202