ABB i-bus KNX Product Manual page 144

ABB i-bus® KNX PARAMETERS
—
7.9.3.1.6.2
DEPENDENT PARAMETER
Coasting delay
This parameter can be used to define the duration of the coasting delay.
Options
0 ... 999 ms
Condition for visibility:
Parameter window Drive \ Parameter Parameter setting \ Option Individual \ Parameter Delay time for
drive \ Option Custom
—
7.9.3.1.6.3
DEPENDENT PARAMETER
Minimum run time for drive
This parameter can be used to define the minimum run time for the drive.
NOTICE
Setting a minimum run time that is too short can damage the connected drive.
►
Options
40 ... 50 ... 600 ms
Condition for visibility:
Parameter window Drive \ Parameter Parameter setting \ Option Individual \ Parameter Delay time for
drive \ Option Custom
Pay attention to technical data for the connected drive
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 144