ABB i-bus® KNX PARAMETERS
—
7.9.8.1.2.4
DEPENDENT PARAMETER
Position height (0 % = top; 100 % = bottom)
This parameter can be used to define the position to which the blind/shutter is moved.
Options
0 ...50...100 %
Condition for visibility:
Parameter window Scene assignments \ Parameter Parameter setting \ Option Individual \ Parameter
Enable scene assignment x \ Option Yes
—
7.9.8.1.2.5
DEPENDENT PARAMETER
Position slat (0 % = open; 100 % = closed)
This parameter can be used to define the position to which the blind/shutter slats are moved.
This parameter is available only in Operating mode Blind/shutter control with slat adjustment .
Options
0 ...50...100 %
Condition for visibility:
Parameter window Scene assignments \ Parameter Parameter setting \ Option Individual \ Parameter
Enable scene assignment x \ Option Yes
Note
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 187