Siemens SION 3AE Series Operating Instructions Manual page 2

Warning and safety notices serve to enable you to avoid hazards and subsequent damage and are marked as
follows:
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious
.
injury
CAUTION
Indicates a hazardous situation which, if not avoided, could result in minor or moderate
.
injury
NOTICE
Indicates, within the scope of these instructions and the warning notices on the SION®
withdrawable module and the installation accessories themselves that the circuit breaker or
an object can be damaged if the relevant notices are not complied with.
Qualified personnel
For the purpose of this instruction manual and these product labels, a "qualified person" is one who is familiar with
the installation, construction and operation of the equipment and the hazards involved and who, in addition, has
the following qualifications:
·
Is trained and authorized to energize, de-energize, clear, ground and tag circuits and equipment in accord-
ance with established safety practices.
·
Is trained in the proper care and use of protective equipment in accordance with established safety practices.
·
Is trained in rendering first aid
NOTICE
These instructions do not purport to cover all details or variations in equipment, or to provide for every
possible contingency to be met in connection with installation, operation, or maintenance. Should further
information be desired or should particular problems arise which are not covered sufficiently for the pur-
chaser's purposes, the matter should be referred to the local Siemens sales office. The contents of this
Instruction Manual shall not become part of or modify any prior or existing agreement, commitment, or
relationship. The sales contract contains the entire obligation of Siemens. The warranty contained in the
contract between the parties is the sole warranty of Siemens. Any statements contained herein do not
create new warranties or modify the existing warranty.
Trademarks Unless otherwise noted, all names identified by ® are registered trademarks of Siemens
AG or Siemens Industry, Inc. The remaining trademarks in this publication may be trademarks owned by
third parties.
.
9229 0002 401 0A
2016-03-03