Dell Latitude 7230 Service Manual page 85

Table 8. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation
Storage interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
M.2 PCIe SSD-0
Type
Device
Enable MediaCard
Secure Digital (SD) Card
Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.
Table 9. System setup options—Display menu
Display
Display Brightness
Brightness on battery power
Brightness on AC power
Touchscreen
Touchscreen
Full Screen Logo
Limit Panel Brightness to 50%
Table 10. System setup options—Connection menu
Connection
Wireless Device Enable
WWAN/GPS
WWAN Bus Mode
Set the operating mode of the integrated storage device controller.
By default, the RAID On option is enabled.
This page allows you to enable the onboard drives.
By default, the M.2 PCIe SSD-0 option is enabled.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during system startup.
By default, the Enable SMART Reporting option is not enabled.
Displays the M.2 PCIe SSD-0 type information of the system.
Displays the M.2 PCIe SSD-0 device information of the system.
Enable or disable the SD card.
By default, the Secure Digital (SD) Card option is enabled.
By default, the Secure Digital (SD) Card Read-Only Mode option is not
enabled.
Enable to set screen brightness when the system is running on battery power.
Enable to set screen brightness when the system is running on AC power.
Enable or disable the touchscreen for the OS.
By default, the option is enabled.
Enable or disable full screen logo.
By default, the option is not enabled.
Enable or disable the panel brightness limit to 50%.
By default, the option is not enabled.
Enable or disable the internal WWAN/GPS device
By default, the option enabled.
Set the interface type of the Wireless Wan (WWAN) card.
BIOS setup 85