Decoder Daughter-Board; Removing The Decoder Daughter-Board; Installing The Decoder Daughter-Board - Dell Latitude 7230 Service Manual
Rugged extreme tablet
Hide thumbs
Also See for Latitude 7230:
- Setup and specifications (29 pages) ,
- User manual (9 pages) ,
- Manual (19 pages)
Table of Contents
Advertisement
Decoder daughter-board
Removing the decoder daughter-board
Prerequisites
1. Follow the procedure in
2. Remove the stylus.
3. Remove the
handle
(for the models shipped with a handle).
4. Remove the batteries.
5. Remove the
back-cover
About this task
The figure indicates the location of the decoder daughter-board and provides a visual representation of the removal procedure.
Steps
NOTE:
For models shipped with a scanner in the expansion bay at the top side of the tablet.
1. Remove the two screws (M1x2.65) that secure the decoder daughter-board to the system board.
2. Disconnect the scanner FPC from the connector in the decoder daughter-board.
3. Remove the decoder daughter-board away from the tablet.
Installing the decoder daughter-board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the decoder daughter-board and provides a visual representation of the installation
procedure.
52
Removing and installing components
before working inside your
assembly.
tablet.
Hide quick links:
Advertisement
Table of Contents
