Steps
1. Peel the conductive tape from the USB/HDMI port.
2. Remove the two screws (M2x3) that secure the USB/HDMI port bracket in place.
3. Remove the USB/HDMI port bracket away from the tablet.
4. Disconnect the USB/HDMI port cable from the connector on the system board.
5. Remove the single screw (M2x5) that secures the USB/HDMI port to the tablet.
6. Remove the USB/HDMI port away from the tablet.
Installing the USB/HDMI port
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the USB/HDMI port and provides a visual representation of the installation procedure.
Removing and installing components
41