Dell Latitude 7230 Service Manual page 42

Steps
1. Align the screw holes on the USB/HDMI port with the screw holes on the tablet.
2. Replace the single screw (M2x5) to secure the USB/HDMI port to the tablet.
3. Connect the USB/HDMI port cable to the connector on the system board.
4. Align the screw holes on the USB/HDMI port bracket with the screw holes on the system board.
5. Replace the two screws (M2x3) to secure the USB/HDMI port bracket in place.
6. Adhere the conductive tape to the USB/HDMI port.
Next steps
1. Install the back-cover
2. Install the batteries.
3. Install the handle (for models shipped with handle).
4. Install the stylus.
5. Follow the procedure in
42 Removing and installing components
assembly.
after working inside your tablet.