NETGEAR RangeMax WPN511 User Manual page 25

Install the NETGEAR RangeMax™ Wireless
PC Card WPN511.
a. Locate an available CardBus slot on
the side of your notebook. Hold the PC
Card with the NETFGEAR logo facing
up and insert it into the CardBus slot.
After a short delay, the Found New
Hardware Wizard displays.
b. Follow the Found New Hardware
Wizard steps, click Finish when done,
and if prompted, restart your computer.
c. Next, you will be prompted to choose
the country where you are located.
Select your location from the list.
You should see the WPN511 system
tray icon on the right in the lower right
portion of the Windows task bar.
Basic Setup
User Manual for the NETGEAR RangeMax™ Wireless PC Card WPN511
February 2005
Found New Hardware Wizard
Note: If Windows warns about a Digital
Signature Not Found, click Yes to continue.
WPN511 System Tray Icon
3-9