NETGEAR RangeMax WPN511 User Manual page 35

b. Click the WPN511 icon
Wireless Assistant.
c. The Settings tab displays as shown below.
Figure 4-2: Smart Wizard Wireless Assistant Settings tab page
2. Configure the wireless Network settings.
a. In the Network Type section, be sure that Infrastructure is selected.
b. Enter the SSID. This is also called the Wireless Network Name.
Note: You will not get a wireless network connection unless the network SSID matches
exactly what is configured in the access point.
Tip: You can click the Network tab to view a list of the available wireless networks and
their SSIDs at the location where you are.
3. Save your settings in a Profile.
Type a descriptive name for the
a.
b. Click Save Profile.
c. Click Apply.
d. Click Close to exit the configuration utility or Cancel to return to the previous settings
Configuration
User Manual for the NETGEAR RangeMax™ Wireless PC Card WPN511
in the Windows system tray to open the Smart Wizard
Profile in the "Profiles" field.
All the configuration settings are saved in this profile.
February 2005
4-3