Dhcp Configuration Of Tcp/Ip In Windows Nt4 - NETGEAR RangeMax WPN511 User Manual

DHCP Configuration of TCP/IP in Windows NT4

Once you have installed the network card, you need to configure the TCP/IP environment for
Windows NT 4.0. Follow this procedure to configure TCP/IP with DHCP in Windows NT 4.0.
1. Open the Network panel.
a. Choose Settings from the Start Menu.
b. Select Control Panel to display Control Panel
window.
c. Double-click the Network icon to display the
Network panel, as shown to the right.
2. Go to TCP/IP Properties.
a. Select the Protocols tab.
b. Select "TCP/IP Protocol" in the Network
Protocols box, and click the Properties button.
Preparing Your PCs for Network Access
User Manual for the NETGEAR RangeMax™ Wireless PC Card WPN511
February 2005
C-11