NETGEAR RangeMax WPN511 User Manual page 62

User Manual for the NETGEAR RangeMax™ Wireless PC Card WPN511
3. Go to Properties.
a. Click the Properties button to view details
about the connection.
The TCP/IP details are shown on the
Support tab page.
b. Select "Internet Protocol", and click
Properties to view the configuration
information.
4. Set DHCP for TCP/IP.
a. Verify that the following two radio buttons
are selected:
• Obtain an IP address automatically
• Obtain DNS server address
automatically
b. Click the OK button.
This completes the DHCP configuration of
TCP/IP in Windows XP for this computer.
c. Repeat these steps for each computer with
this version of Windows on your network.
C-8 Preparing Your PCs for Network Access
February 2005