Image Menu - Dukane CP-RX80 User Manual

Table of Contents

Advertisement

IMAGE menu

From the IMAGE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
ASPECT
OVER SCAN
V POSITION
H POSITION
(continued on next page)
Using the ▲/▼ buttons switches the mode for aspect ratio.
For a computer signal
NORMAL
4:3
For a video signal, s-video signal or component video signal
4:3
16:9
14:9
For no signal
4:3 (fixed)
• The NORMAL mode keeps the original aspect ratio of the signal.
Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture)
• This item can be selected only for a video, s-video and component
video signal.
• When this adjustment is too large, certain degradation may appear
at the frame area of the picture. In such a case, please adjust small.
Using the ◄/► buttons adjusts the vertical position.
Down
Up
• Over-adjusting the vertical position may cause noise to appear on
the screen. If this occurs, please reset the vertical position to the
default setting. Pressing the RESET button when the V POSITION
is selected will reset the V POSITION to the default setting.
• When this function is performed on a video signal, s-video signal,
or component video signal, the range of this adjustment depends
on OVER SCAN (
OVER SCAN is set to 10.
Using the ◄/► buttons adjusts the horizontal position.
Left
Right
• Over-adjusting the horizontal position may cause noise to appear on
the screen. If this occurs, please reset the horizontal position to the
default setting. Pressing the RESET button when the H POSITION is
selected will reset the H POSITION to the default setting.
• When this function is performed on a video signal, s-video signal,
or component video signal, the range of this adjustment depends
on OVER SCAN (
OVER SCAN is set to 10.
Description
16:9
16:10
Large (It reduces picture)
above) setting. It is not possible to adjust when
above) setting. It is not possible to adjust when
IMAGE menu
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-rx80jCp-rx80w

Table of Contents