Menu Item Setup (Firmware Version - Basic) - Siemens Sitrans FX300 Operating Instructions Manual

SITRANS FX300

6.5.6 Menu item Setup (firmware version - basic)

Level Designation
3.1
3.1.1 Error Msg.
→
3.1.2 Cycle.Disp.
→
3.1.3 Code 1
→
3.2
3.2.1 4-20mA off
→
3.2.5 Function P
→
3.2.7 Totalizer
→
3.2.8 Tot. Conf.
→
(available if Maes.Inst =
Volume, see menu item
1.1.3)
(available if Maes.Inst =
Norm. Vol., see menu
item 1.1.3)
06/2009 - SFIDK.PS.050.F2.02 A5E02100423
Selection / entry Explanation
Set display
Display error
Yes ↑...
Shows error messages in measuring mode in plain text
alternating with the measured values
No ↑...^
Flashing cursor in the top left corner of the display
indicates errors.
Display measured values
Yes ↑...
Cyclically display measured values in measuring mode
(6 s intervals)
No ↑...^
Do not display measured values cyclically
Set security query 1 (menu)
Yes ↑...
Activate access code:
→→→↑↑↑^^^
No ↑...^
Deactivate access code
I/O settings
Current output 4-20 mA and error current
4-20mA ↑...
Current output 4-20 mA
4-20/22E ↑...
Current output 4-20 mA or error current 22 mA
4-20/3.55E ↑...^
Current output 4-20 mA or error current 3.55 mA
Pulse output
Yes ↑...
Activate pulse output
No ↑...^
Deactivate pulse output
Totalizer
Tot. on ↑...
Start totalizer
Tot. off ↑...^
Stop totalizer (value is held)
Configure totalizer
3 Select totalizer unit for volume flow measurement
m
Unit ↑...^
0000000000 Enter preset totalizer value
3
↑...↑...↑...^
m
Reset yes / Reset totalizer /
Reset no ↑...^
Do not reset totalizer/
Disp. off / Display totalizer /
Disp. on ↑...^
Do not display totalizer
Select totalizer unit for standard volume flow
3
m norm
measurement
Unit ↑...^
0000000000 Enter preset totalizer value
3
norm ↑...↑...↑...^
m
Reset yes / Reset totalizer /
Reset no ↑...^
Do not reset totalizer/
Disp. off / Display totalizer /
Disp. on ↑...^
Do not display totalizer
www.siemens.com/flow
OPERATION
6
51