Viewing A List Of Attached Devices - NETGEAR KWGR614 Reference Manual

Table 4-3: Router Statistics Items
Item Description
Tx B/s The current transmission (outbound) bandwidth used on the LAN ports.
Rx B/s The current reception (inbound) bandwidth used on the LAN ports.
Up Time The time elapsed since this port acquired the link.
Poll Interval Specifies the intervals at which the statistics are updated in this window. Click on Stop
to freeze the display.
Set Interval Enter a time and click the button to set the polling frequency.
Stop Click the Stop button to freeze the polling information.

Viewing a List of Attached Devices

The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the Main Menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown below.
Figure 4-6
For each device, the table shows the IP address, Device Name (if available), and Ethernet MAC
address. To force the router to look for attached devices, click the Refresh button.
Note: If the router is rebooted, the table data is lost until the router rediscovers the
devices.
Maintenance
54Mbps Wireless Router Model KWGR614 Reference Manual
v1.2, September 2006
4-9