Configuring Static Routes - NETGEAR KWGR614 Reference Manual

3. Check the Use a dynamic DNS service check box.
4. Select your dynamic DNS Service Provider from the Service Provider box.
5. Type the Host Name (or domain name) that your dynamic DNS service provider gave you.
6. Type the User Name for your dynamic DNS account.
7. Type the Password (or key) for your dynamic DNS account.
8. If your dynamic DNS provider allows the use of wildcards in resolving your URL, you may
select the Use wildcards check box to activate this feature. For example, the wildcard feature
will cause *.yourhost.dyndns.org to be aliased to the same IP address as yourhost.dyndns.org
9. Click Apply to save your configuration.

Configuring Static Routes

Static Routes provide additional routing information to your router. Under normal circumstances,
the router has adequate routing information after it has been configured for Internet access, and
you do not need to configure additional static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets located on your network.
From the Main Menu of the browser interface, under Advanced, click on Static Routes to view the
IP Static Routes menu, shown below.
Figure 5-8
To add or edit a Static Route:
Advanced Configuration of the Router
54Mbps Wireless Router Model KWGR614 Reference Manual
v1.2, September 2006
5-13