Calibrating The Touch Screen - Siemens CLINITEK Advantus Operator's Manual

Calibrating the Touch Screen

Calibrate the touch screen if it does not respond correctly when a key is
touched.
1. Turn analyzer power off.
2. Wait several seconds.
3. Turn analyzer power on.
4. When the title screen displays, touch the screen anywhere.
The display prompts Touch the top left corner and an X displays in the
corner.
5. Touch the screen at the center of the
6. Repeat when the prompt changes to Touch the bottom right corner.
When the touch screen is calibrated, the display automatically continues
in the normal sequence of screens.
54
.
X
Clinitek Advantus Operator's Guide