Memory - Siemens CLINITEK Advantus Operator's Manual

Memory

The analyzer software is stored in internal flash memory. When necessary,
you can update the software using an electronic memory card located on the
back of the interactive touch display.
The analyzer stores the operating parameters, including those selected by
the user, and up to 500 patient results and 200 quality control results. This
information is in a RAM with a battery backup, and is held in memory
regardless of whether the analyzer power is on or off.
Memory card slot
1
2 Cooling fan
Power switch
3
4 Line cord receptacle
5 Ethernet interface connector
Serial interface connector
6
7 Printer interface connector
Keyboard and barcode reader interface connector
8
Figure 3 Connections, Power, and Memory
12 Clinitek Advantus Operator's Guide