Jeep WRANGLER 2023 Manual page 35

2. Flip the seat cushion up and forward.
Flip Seat Bottom Forward
3. Pull the seatback release lever upward fully
(located on the outboard side of the rear
seatback).
Lift Seatback Release Lever Up
NOTE:
Pulling the lever partway will fold the head restraint
forward. Pulling it all the way up will release the
seatback.
4. Fold the seatback forward against the floor.
Fold Seatback Down
5. Repeat on the other side if desired.
GETTING TO KNOW YOUR VEHICLE
To Raise The Rear Seat
1. Raise the seatback and lock it into place.
NOTE:
If interference from the cargo area prevents the
seatback from fully locking, you will have difficulty
returning the seat to its proper position.
2. Raise the head restraint until it locks into
place.
3. Return the seat cushion to its original position.
WARNING!
Be certain that the seatback is securely

locked into position. If the seatback is not
securely locked into position the seat will not
provide the proper stability for child seats
and/or passengers. An improperly latched
seat could cause serious injury.
Do not store items on top of the battery under-

neath the seat cushion. The rear seat bottom
must not have any obstruction that prevents it
from being in the fully lowered position, other-
wise the bottom may not lock during frontal
impact. If the seat cushion is not fully lowered,
serious injury could occur.
33
2