Jeep WRANGLER 2023 Manual page 26

24 GETTING TO KNOW YOUR VEHICLE
Number Of Indicator Percent Of
Lights Illuminated Battery Charge
Two outer lights are Indicates an error in the
blinking charging process
Lights turn on one at
Indicates system is
a time from left to
waiting for scheduled
right (when looking
time in charge schedule
at the front of
to begin charging
the vehicle)
All lights turn on, then Indicates a successful
immediately turn off
NOTE:
For each segment of lights illuminated indicating
the percent of battery charge, two different blink
rates are used. A blink rate of 1 second on/1
second off indicates that the first half is charging.
The blink rate will increase to 0.5 second on/
0.5 second off to indicate that the second half is
charging. When the battery is fully charged, the
blinking stops and the lights remain illuminated as
charging continues.
Next to the charging inlet, there is an LED that
changes color based on charging status.
plug-in
LED Light Color
Blue
Flashing Green
Solid Green
Blinking Red
Charging Inlet LED Location
LED Charging Inlet
Status
Indicates that the system is
waiting for a scheduled
recharge.
Charging process in place.
Indicates the vehicle is
fully charged.
Indicates a fault in the
charging system.
H E P
YBRID LECTRIC AGES
Within your Uconnect system is the Hybrid Electric
Pages App that allows you to see your vehicle's
power flow, understand your drive history, and set
a charging schedule for your vehicle's high voltage
battery. To access this App, press the Apps button
on the main menu bar of the radio's touchscreen,
and locate the Hybrid Electric Pages App. Pressing
the App button brings you to a set of four pages:
Power Flow, Driving History, Charging Schedule,
and e-Save.
Apps Menu Screen