Table of Contents
Advertisement
32
GETTING TO KNOW YOUR VEHICLE
3. Place the base of the exterior mirror into the
hole on the door, and support it while attaching
the three mirror bolts through the inside of the
door using a #T40 Torx head driver.
Attach Exterior Mirror
1 — Support Mirror From Outside
2 — Attach Three Mirror Bolts From Inside
NOTE:
Recommended torque for the mirror bolts is
5.9 ft· lb / 8.0 N· m .
4. Repeat steps 1-3 on the opposite side front
door.
SEATS
WARNING!
It is dangerous to ride in a cargo area, inside
or outside of a vehicle. In a collision, people
riding in these areas are more likely to be seri-
ously injured or killed.
Do not allow people to ride in any area of your
vehicle that is not equipped with seats and
seat belts. In a collision, people riding in these
areas are more likely to be seriously injured or
killed.
Be sure everyone in your vehicle is in a seat
and using a seat belt properly.
M
A
(R
ANUAL
DJUSTMENT
EAR
WARNING!
Do not pile luggage or cargo higher than the top
of the seatback. This could impair visibility or
become a dangerous projectile in a sudden stop
or collision.
Flip And Fold Rear Seat
The 60/40 split rear seat can be folded down for
added cargo space. To fold the rear seat, proceed
as follows:
1. Lift the seat cushion by grabbing the outer
edges of the cushion and pulling upward.
S
)
EATS
Lift Seat Cushion
Hide quick links:
Advertisement
Table of Contents
